Features:

> Service life of 50,000 gallons (150,000 L)
> Compact design with quick disconnect fittings for simple, quick installation
> Shuts off automatically when bag is empty and restarts when a full bag is connected
> High altitude auto shut-off also available
> Fully automatic, operates only when beverage is being dispensed
> 1/4" (6.35 mm) barbed, CO2 exhaust port connection for venting away from confined areas
> Maintains constant pressure at the dispensing valve
> High suction capability empties syrup down to a minimum residual
> Recyclable materials

技術規格:

> Self Priming: 3.05m

> Operating pressure: 1.4~5.5 bar

> Liquid Inlet Pressure: 0.7 bar
> Flow Rate: 118.3 ml/sec

認證:

CE, NSF Standard 18

Features:

> Air compressors can be used to pressurize the beer pumps
> Cost effective; no need for mixed gases or gas blenders
> The beer pump increases the pressure in the pro duct dispense line, which ensures that the inherent gas in the solution (beer) cannot break out
> Smaller I.D. tubing can be used in some installations, which reduces the amount of beer wasted when cleaning lines
> The air/gas used to power the pump never comes in contact with the beer, thus providing protection from flat or tainted beer due to impure air contamination or oxidation
> Capable of traversing up to 800 feet (244 m), horizontally through a single line
> Capable of delivering beer up to 10 stories (30 m), vertically through a single line
> Pump can also be utilized to aid in beer line cleaning through wall mounted cleaning sockets
> Infinitely variable to suit all runs and rises
> Can dispense to multiple faucets (up to 5) from a single keg or keg series. This will cut walk-in cooler clutter by lowering the number of kegs on tap at one time which promotes product quality/freshness
> Feeds up to three faucets through a single line

Pump 技術規格:

> Self Priming: 3.05m

> Operating pressure: 0.7~6.2 bar

> Liquid Inlet Pressure: 2.1 bar
> Flow Rate: 18.9 LPM

認證:

CE, SK, NSF Standard 18

Features:

> Compact automatic demand pump
> Sealed pressure switch and motor
> Self-priming; pump can be located above supply tank
> Can run dry for extended periods of time without damage
> Flow rates to 2 GPM (7.6 LPM) and operating pressure to 60 psi (4.1 bar)

Pump 技術規格:

> Port size: 3/8" NPT

> Operating pressure: 4.1 bar

> Max. Flow Rate: 7.6 LPM

認證:

CE, NSF